As an Amazon Associate, I earn from qualifying purchases. There is no extra cost to you. Thank you if you use our links; we appreciate it! Learn More.
When golfing is that one item in your daily routine you can’t think without, it’s pretty likely for the grip of your clubs to suffer wears and tears very often. And that’s why regripping the clubs becomes necessary every half a year or so.
While you can quickly get the job done at your local golf store, doing it by yourself can save a lot of money. And at the same time, it can be a fun project too, especially if you’re the willful handyman in the house.
If you haven’t done it before, we’re here to help. Up ahead, you’ll find our step-by-step guide showing how to regrip golf clubs at home. So, stick around.
To regrip a golf club, you need to get some supplies ready. Follow the list below before you set out for the purchases.
A hook blade for removing the old grip.
A cutter knife for removing the existing tape from the shaft.
A golf club re-gripping kit that includes a solvent, a rubber vise clamp, and a double-sided golf grip tape. However, not all the kits may come with all the tools mentioned here. In that case, you’ll have to purchase the items separately.
And lastly, don’t forget a new grip that comforts your hand while playing the shots.
Here’s one thing to remember- you may still find some golf grips out there harder to attach to your club even after gathering all the golf club regripping tools mentioned above, especially when you’re doing it for the first time. You may also end up damaging it entirely in the process. So, keep spares if you feel that’s a necessity.
Here we’ve suggested 5 golf club regripping tools for you:
How to Regrip Golf Clubs at Home Properly?
You can get underway with the regripping job once you’ve gathered all the required supplies. Follow each of the steps given below one by one.
Step-1: Removing the Old Grip
Start with getting rid of the existing grip your golf club currently has. You’ll be better of using the hook blade for doing it instead of the cutter knife, for it’ll be much more comfortable with the former one. Besides, you’ll hardly want to damage the shaft, especially if it’s graphite-made.
Make an incision from the top to the bottom of the grip by placing the hook under it before dragging it all the way down. You can use a vise clamp to keep it firm while doing it. A steady cut will should be enough to cause the grip to come loose easily. Be careful, so you don’t injure yourself in the process.
Step-2: Removing the Existing Tape
After successfully removing the old grip, you’ll see the firmly-wrapped around tape that you’ll now need to get rid of.
Use the cutter knife for doing this job. Carefully scrape the entire shaft and make sure there’s no leftover of the old tape. You must be extra careful if it’s a graphite shaft since it’ll be more prone to damages.
Also, you’ll need to be patient enough throughout this part, for it’s the most time-consuming one. However, if you want to expedite the process, you can use a heat gun or a blowdryer to make the tape warm beforehand, so it becomes easier to peel it off.
Step-3: Applying the New Tape
The peeled-up shaft will now need a new tape, and here’s how you’ll do it.
Here’s the deal, you can’t apply the tape under the bottom of your new grip. So what you need to do is to hold up the new grip side by side with the shaft, leaving your thumb where the tape is supposed to end. If you find this measuring method somewhat complicated, you can also use a tape measurer as well.
You’ll be good to leave a half or a quarter of an inch down the bottom of your grip without tape if need be since the additional room won’t impact the firmness of the wrap.
Here we’ve suggested 5 golf club grip tape for you:
Step-4: Cleaning with Solvent
Now it’s time for some cleaning and pouring. Take the new golf grip at one hand and cover the hole at its bottom with a finger or a golf tee. Then pour or spritz a generous amount of golf grip solvent inside it. Now use your hand to cover the open end of the grip too, before giving it a good shake. The shake will help the solvent to spread throughout the whole interior of the grip.
After you’ve shaken it well, you should now pour the excess solvent liquid from the grip to the taped shaft of your golf club. Make sure you’ve covered the entirety of the taped surface. You can use a tray underneath the shaft while doing this to catch the spilled portions that can be used to regrip other golf clubs in your set.
Here we’ve suggested 4 golf grip solvent for you:
Step-5: Fitting the New Grip
You’ve come down to the most vital step of your golf club regrip task. You’ll need to do this as quickly and steadily as you can. So prepare well, so the grip doesn’t stick in the middle of the shaft and lead you to throw it away thereby. While regripping at home, especially for beginners, it’s pretty natural to muddle a grip or two before a successful attempt. That’s why I’ve already suggested keeping spares.
Now, place the shaft between the gap of the vise clamp and secure it firmly before swiftly sliding the grip on to it. If you have a professional vise, that would be the best for use.
You must also be quick enough to adjust the required tweaks and maneuvers since you’ll get too little time to be able to make the moves. Otherwise, the grip may stick in the middle of the shaft. Now check your work in the address position, and make sure the grip is correctly aligned.
Step-6: Cleaning Up and Drying the Grips
The grips are on, and you’re all done. To tidy things up, clean the excess liquid with a dry towel and leave the club to dry itself before taking it out on the golf course.
Frequently Asked Questions (FAQs)
Below 7 inches
Over 9.25 inches
There you have it. Now you know how to regrip golf clubs by yourself, and you’re good to try it out.
Here’s one thing before you go- despite the low cost, regripping golf clubs at home can be pretty hectic a task that consumes lots of time and effort. Besides, the possibilities of ruining a few grips in the process are always there. So, if you can afford it, the best thing would be to spend a few more bucks and get things done by an expert.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.
Daisy is the Founder and Editor in Chief of Golfs Hub. She is associated with Golf for more than 20 years. She got the inspiration from her father. She is a very private person & doesn’t like to be photographed. She’s worked in nearly every job in the golf industry from club fitting to instruction to writing and speaking. Now she is enjoying her retirement from day job… but not from Golf! Daisy lives in southeasternmost part of New York state with her family.